Compare Speed Differences Between 2-, 3-, and 4-Drive SSD RAIDS

Recently, I bought an 8 TB OWC Thunderblade for myself to speed my editing. This 4-blade, NVMe SSD RAID is really fast – though not as fast as it could be.

NOTE: Read my review of the Thunderblade here.

However, because this unit contains four separate SSD drives (called “blades”) this also gave me the ability to test the speed differences between different RAID configurations.

NOTE: All my test results and charts are available in a PDF at the end of this article.

In this article, I’ll show you real-world speed results and compare them to what we need for single and multi-camera editing.

MY SYSTEM

Using a 16″ MacBook Pro (with an M1 Pro chip) running macOS Monterey, I formatted a 1 TB Samsung T-5 PCIe SSD using APFS in macOS Monterey. It was connected via USB-C.

I then compared it to various configurations of an OWC Thunderblade NVMe SSD RAID.

NOTE: Recent testing shows that macOS Ventura is 15-25% slower reading and writing SSD drives. Expect your results to be lower than mine. (Here’s the article: Warning: SSD and ExFAT Speeds are Much Slower in macOS Ventura & Reformatting is Trickier. My hope is that Apple fixes this in future updates.)

THE TESTS

Using Disk Utility, I combined the internal drives of the Thunderblade into three different RAID 0 configurations: 2-drive, 3-drive and 4-drive.

THE RESULTS

If we set the speed of a PCIe SSD equal to 100%:

Converting these same numbers into MB/second (MB/s):

Read speeds are more important than write speeds for media editing. No current video editing software will render or export media at anywhere close to these write speeds.

NOTE: A stand-alone NVMe SSD should be closer to 2,500 MB/second. However, I don’t have a stand-alone unit to test. A single blade on the Thunderblade should max out around 975 MB/second.

IS IT FAST ENOUGH?

While it is helpful to see these speed numbers, the bigger question remains: Are these speeds fast enough? This chart (above) from Blackmagic Disk Speed Test displays the results of editing media on a 2-drive SSD RAID. As you can see, all current video formats are easily supported.

NOTE: Well, OK. 12K 60fps is not. How often are you editing 12K 60 fps today?

Where 3- and 4-drive RAIDs make a big difference is in multicam editing. Based on some unofficial tests that I did, a 3-drive SSD RAID connected via Thunderbolt 3/4 easily supports 10 streams of 4K video, and about 20 streams of proxy video. I would expect the 4-drive RAID configuration to support 15 streams of 4K and 30 streams of proxy video.

NOTE: As with everything in technology, always test your system before you start editing to make sure it is fast enough to support what you want to do.

While the speeds of 3- and 4-drive configurations are slower than I would expect, they are still fast enough to support significant multicam editing, especially using proxies.

SUMMARY

I found this exercise very helpful in seeing the differences in speed between different  RAID configurations. We think of SSDs as being “infinitely fast.” But, like all tech, they have limits. You can use these charts to help you plan the gear you need as your media needs expand.

EXTRA CREDIT


Bookmark the permalink.

2 Responses to Compare Speed Differences Between 2-, 3-, and 4-Drive SSD RAIDS

  1. Kevin Schumacher says:

    Hi Larry,

    Another truly useful collection of important info, thank you!

    One concern I have about basing my workflow on a RAID0 array is obvious: it also increases the risk of data loss.

    If a single drive experiences a failure of any kind, all is lost… and your backup should be valid & current.

    Yes, I’m aware: many editors work off RAID0’s and back up throughout the day, to a (presumably) fast, external device. That works too I guess, but good to always be reminding folks of these ‘truths’.

    • Larry Jordan says:

      Kevin:

      I don’t disagree with what you say, but… For spinning media, I agree that a RAID 5 is best.

      For SSDs, especially for multicam editing, the speed trade off is significant. SSDs don’t fail that often, generally at the very beginning when you first connect them. Keep your project on one drive, media on RAID 0, and have backups which should be made daily, not hourly, and you’ll get the best performance with the protection of good backups.

      I use spinning media for archives, and SSDs for editing performance.

      Larry

Leave a Reply to Kevin Schumacher Cancel reply

Your email address will not be published. Required fields are marked *

Larry Recommends:

FCPX Complete

NEW & Updated!

Edit smarter with Larry’s latest training, all available in our store.

Access over 1,900 on-demand video editing courses. Become a member of our Video Training Library today!

JOIN NOW

Subscribe to Larry's FREE weekly newsletter and save 10%
on your first purchase.