FCP X: Remove Harsh “S” Sounds

Posted on by Larry

logo-FCPXI have a love/hate relationship with the audio effects and filters in Final Cut Pro X. The filters themselves are amazingly powerful, which I love. But they can only be applied to individual clips, not “tracks,” which make them very cumbersome and slow to use.

This is why I rarely write about them – in concept, they are great. In practice, they are a mess.

However, recently Emory Schley wrote and asked if I could explain how to use the DeEsser effect in FCP X. As someone who has been accused of having somewhat sibilant “ss’es” I can appreciate why an editor would want to use this effect.

So, here’s how it works.

BACKGROUND

All sound is made of up vibrations; pressure waves that radiate from the source to the receiver; from the mouth to the microphone, in our example. The waves are measured in vibrations per second, which are called frequencies and displayed as Hz (Hertz).

Different sounds use different frequencies. For example, vowels (a, e, i, o, u) are all lower-frequency sounds. They give the voice its characteristic sound and richness. Consonants are higher-frequency sounds. They provide diction and clarity.

For example, the difference between the letter “F” and “S” – both of which are called “fricatives” – are frequencies around 3,500 Hz for a guy and around 4,500 Hz for a girl. Those are the frequencies the hissing sound produces when you say the “S”. If the hiss is there, you hear an “S,” if it isn’t, you hear an “F.”

NOTE: Try this yourself. Say the two letters and feel that both are formed almost the same way in the mouth; the only essential difference is the presence of the hiss.

Whistle/sibilance frequencies can vary widely. Always listen to make sure you are removing the portion of the sound you expect.

The problem is that, sometimes, that hiss develops a whistle. This whistling ‘S’ is called “sibilance” and, taken to extremes, is unpleasant to listen to.

What the DeEsser effect does – whether in Final Cut, or any other application – is reduce the offending hissing frequencies without damaging the rest of the sound.

Here’s how this effect works in Final Cut Pro X; the process is the same in other applications, though the filter interface is different.

APPLY THE EFFECT

Here’s an audio clip with multiple “S” sounds in it.

Open the Effects Browser (shortcut: Cmd + 5), scroll to the Voice category and look in the Logic sub-category for the DeEsser effect. (These effects are also commonly called audio “filters.”)

NOTE: These audio filters first appeared in Final Cut Pro as part of Final Cut Studio suite of applications (specifically FCP 5). They were developed for Logic and have long been considered world-class. Apple provided these filters in Final Cut Pro X as part of its initial release.

Apple also provides a Final Cut subcategory in FCP X which, in most cases, are the Logic filters with presets applied. While these settings are not bad, I prefer to use the Logic filters directly.

Drag the DeEsser effect onto the clip you want to clean up.

Open the Inspector (shortcut: Cmd + 4), click the Audio tab and click the icon to the right of the DeEsser title.

This opens the DeEsser interface which allows us to tune the filter to find the harsh “S” sound that we want to remove, then determine how much of the sound you want to remove.

NOTE: You generally only want to reduce the whistling sound of the “S.” If you remove the hiss entirely, you just changed the “S” to an “F,” which is not what we want to do.

TUNE THE EFFECT

To adjust the filter to your specific clip, use the Range tool (shortcut: R) to select a portion of the clip with a lot of “S” sounds.

In the View menu, turn on Loop Playback (shortcut: Cmd + L), then choose Play Selection (shortcut: /). This begins a continuous playback of the selected area. (Press the spacebar to stop playback.)

With the clip playing, alter the Detection Frequency by dragging the dial in the upper left until the Activity light in the lower right glows every time you hear a strong “S.”

In this example, the harshest portion of the “S” sound is 3800 Hz.

To hear your selection more clearly, switch the Monitor from Off to Sens. This allows you to hear just the portion of the sound you are “sensing.” Adjust the Frequency Detection setting until you hear the “S” as clearly and loudly as possible.

NOTE: This is called finding the “center frequency” of a sound.

Next, adjust the Suppressor Frequency to match the Detection frequency.

NOTE: Sometimes it is easier to detect an underlying frequency, the “S,” then remove the whistle, which is at a different frequency altogether. This is why there are two separate frequency controls.

Finally, set the Monitor menu to Sup. to enable Suppression and adjust the Strength until the harshness is reduced, without removing the “S” sound entirely.

NOTE: I generally don’t mess with the Sensitivity dial or Smoothing slider. You are welcome to play with them and see if they improve the sound.

Done.


Bookmark the permalink.

4 Responses to FCP X: Remove Harsh “S” Sounds

  1. jay says:

    Thanks Larry, i had no idea how this worked. I wonder if this will also work on singing? I have some clips that the female lead leans in to the mike and you get a very pronounced high frequency s that almost sounds distorted. I never thought of trying this on it as i only want to isolate the voice and not other instruments. Thanks for the food for thought.

  2. Andrés says:

    Thanks a lot Larry! you saved me a lot of head pain trying to clean a poor wireless microphone that I had to record in a seminar. Oh god. The sound was full of “S” and also with levels going up and down like crazy. Thanks to this post and your Limit Audio post, it’s pretty good after a few minutes.

    Regards from Chile!

  3. Tommy says:

    Thanks a lot Larry – you are the best “explainer” on the planet ! Thanks a million for this and for all your other invaluable contributions!!

Leave a Reply to Tommy Cancel reply

Your email address will not be published. Required fields are marked *

Larry Recommends:

FCPX Complete

NEW & Updated!

Edit smarter with Larry’s latest training, all available in our store.

Access over 1,900 on-demand video editing courses. Become a member of our Video Training Library today!

JOIN NOW

Subscribe to Larry's FREE weekly newsletter and save 10%
on your first purchase.