[ This article was first published in the May, 2005, issue of
Larry’s Monthly Final Cut Studio Newsletter. Click here to subscribe.
Updated significantly in March, 2006. ]
I’ve had a number of requests for instructions on the best way to export a Final Cut project to a DVD.
Here are the steps:
The principal format that SD DVD-Video supports is MPEG-2. However, that’s not a video format that Final Cut normally works in. So, here’s the best way to convert your FCP project into something a DVD can work with.
The best way to export your sequence is as follows:
- Open your sequence in the Timeline.
- Select File > Export > QuickTime movie
- Make sure the top pop-up menu is set to Current Settings
- Make sure Audio and Video are selected, assuming you want to export both audio and video.
- If you didn’t use Chapter markers in FCP, set Markers to None; if you did set chapter markers, set Markers to DVD Studio Pro Markers.
- If you are compressing this to MPEG-2 on your system, uncheck Make Movie Self-Contained; this creates a QuickTime Reference movie
- Give the file a name and click SAVE to save it
There are two types of QuickTime movies: self-contained and reference.
While some editors prefer to create self-contained movies, I prefer reference movies instead. There are only six reasons to export a self-contained QuickTime movie:
If any of these reasons are true, you should export a self-contained QuickTime movie. However, most of the time, you only need the movie to last long enough to get compressed, at which point you delete it from your system. In these cases, you don’t need to waste the time or space creating a self-contained QuickTime movie. A reference movie will work just fine.
The quality and contents of the reference and self-contained movie are identical.
Next, if you have a current version of iDVD, you can use it to create your DVD.
- Open iDVD
- Give your DVD Project a name and save it
- Select a Theme — a graphical look for your DVD
- Drag your QuickTime movie (exported above) into iDVD
- Add any titles and images you wish to the main screen
- Burn your disk.
Current versions of iDVD can burn between 90 and 120 minutes of material.
The quality will be quite good and should meet your needs for all non-commercial releases of a DVD. Best of all, iDVD is free.
If you want to create a DVD using DVD Studio Pro, you now have two additional choices:
- Compress the Quicktime movie in DVD Studio Pro
- Compress the Quicktime movie in Compressor.
Here is how you decide where to encode your video
- If your video is short and you don’t need to crop the video, add filters, convert the audio to AC3, or change formats (say from NTSC to PAL), compress it in DVD Studio Pro.
- If it is longer than, say, 30 minutes, or you need to make changes, compress it using Compressor.
To compress the file in DVD Studio Pro, simply import your QuickTime movie as an Asset. DVD SP will compress it in the background automatically.
To compress the file in Compressor, DON’T use “Export to Compressor” in FCP — it takes forever. Instead, export your project as a QuickTime movie then drag the file into Compressor and compress.
My DVD tutorials on DVD Studio Pro can help you get the most out of DVD Studio Pro and Compressor, but the short answer is that for short clips, using the preset, “High Quality Encode” will be fine. For clips longer than 30 minutes, you should make some adjustments to this setting to improve file size and image quality.
Here’s an additional article that will help explain what compression settings to use:
Publishing the article created a fair amount of response, so, I decided to group them together to make the discussion easier to follow.
Gabe Unterman writes:
I have a question about newsletter #15, exporting Project files for DVD.
We are using FCP HD with DVD Studio Pro 3. In your newsletter you suggest exporting the final project as a QuickTime movie and then compress the file in Compressor or DVD Studio Pro. What I have been doing is exporting my final project from FCP as a MPEG 2 in the QuickTime Conversion menu. If it is a large project I adjust the file size in the “Quality” menu of the MPEG 2 options. Then import the MPEG 2 files into DVD Studio Pro and creating a DVD from the files exported from FCP. Would you suggest I export the project as you say in the newsletter or continue with what I have been doing? I am a little confused because I thought what I have been doing is the most efficient way to make a DVD from my FCP projects.
Larry replies: When Gabe first wrote, I sent him this reply:
“Your system works, but it isn’t efficient. First, you are tying up FCP during the entire export and compression process, which can take a long time. Second, you don’t have the same control over your compression as you do in Compressor. Third, depending upon your video format, you may be well advised to crop the image, which can’t be done using FCP export.
For me, it’s mainly a time and control issue. However, there’s nothing intrinsically wrong with what you are doing.”
However, since then, I’ve learned more reasons why this isn’t a good idea. In the version of Compressor that ships with FCP HD, your technique works fine. In the Compressor that ships with FCP 5, your technique will no longer work.
The new version of Compressor has technology in it that is not duplicated using QuickTime conversion. For this reason, you need to start changing your habits so that you follow the guidance in that article: export using File > Export > QuickTime movie.
If you are compressing the video on your system, make the movie a Reference movie. If you are archiving the movie, or sending it to someone else to compress, make it a self-contained movie.
I have never been comfortable with exporting using QuickTime Conversion. For one thing, it automatically down-samples your movie to 8-bit. For another, it will not be as good a quality as Sorenson Squeeze for the web, or Compressor for DVD. Third, Apple removed the MPEG-2 compression option with the release of QuickTime 7. Finally, the codecs it contains, while adequate for home use, are not up to professional standards either in terms of file size or image quality.
Uli Plank, from Germany, writes:
Thank you for your current newsletter.
I’d like to add one word of caution to your short description of exporting projects from FCP to Compressor. From your wording inexperienced users might conclude that Compressor is good for getting your audio into A.Pack as well.
I can’t recommend this, since I’ve frequently observed that AIFF files exported through Compressor and used in A.Pack get out of sync as opposed to those exported directly from FCP. I’m not sure if this happens in PAL only, but it is a long-standing bug in Compressor well-known in our community over here. Until know it has never been fixed, even if I (and others) have informed Apple again and again.
- Export your video from FCP and encode it to MPEG-2 in Compressor
- Export your audio as WAVE or AIFF from FCP and encode it to AC-3 in A.Pack
- Don’t route audio through Compressor (which can’t compress audio anyway).
Let’s hope it’ll be fixed in DVD SP 4 with it’s tighter integration of AC-3 encoding (and hopefully the dual-CPU bug too), but for the time being one should advise FCP users to export audio always straight from FCP and NOT through Compressor.
Larry replies: Uli, this is not a problem I’ve noticed here in the U.S. using NTSC video. So, thank you for providing a warning and a workaround.
At a recent demo of DVD SP 4, I asked the DVD SP Product Manager, Brian Hoffman, if Apple had made any changes to the integration between DVD SP and FCP 5 so exporting to Compressor worked properly. He said that he didn’t think so. My feeling is that if Brian doesn’t think so, then probably nothing was done.
So my recommendation is to avoid using “File > Export > To Compressor” for any video format and, instead, do File > Export > QuickTime movie and bring that into Compressor. For audio, I recommend all PAL users follow Uli’s advice.
I just learned two other tidbits on using the Compressor 1 shipped with FCP: using “Motion Estimation (Best)” may cause vertical jitter in your MPEG-2 movies. This problem can be avoided using “Motion Estimate (Better)”.
Also, Compressor 2 has problems with both motion estimation and 2-pass VBR. If you are using Compressor 2 make sure to select 1-pass VBR Better and set Motion Estimate to Better. Using Best settings creates very poor video.
Also, Barry Braverman just told me that AIFF files tend to slowly go out of sync during long movies – because the audio file format is so big. You’ll have better success by converting all your audio to AC3 using Compressor if you movie is longer than, say, 15 minutes.
NEW & Updated!
Edit smarter with Larry’s latest training, all available in our store.