Create a Dual Boot System Disk in macOS High Sierra [u]

Posted on by Larry

[Updates: Sept. 8, 2018, with more information on how long it should take to create a second partition. Oct. 19, 2019, with a note on Catalina.]

UPDATE: As you’ll see in Larry Hinkle’s note at the bottom, APFS volumes do not support partitioning. Instead, create a new Volume and install the OS you need into it.

A “dual boot” system disk allows you to run two different operating systems on the same computer. We do this by “partitioning,” or dividing, the internal boot disk into two or more sections, each with its own version of the macOS.

There are three main reasons for creating multiple partitions of your internal drive:

I wrote about this process a few years ago – read it here – when many editors wanted to retain access to OX X 10.6.x to run Final Cut Pro 7 and DVD Studio Pro. I don’t know what applications we have today that we will want to run in the future, but, just in case, here’s how to create a dual boot disk using macOS 10.13.5 (High Sierra). While the concept of creating a partition is the same, the process is different.

NOTE: If you are working this tutorial along with me, please read the entire article first. My initial settings caused an error, which you can avoid by reading this through first, then create a new partition second.

WHAT WE ARE DOING

Dividing the boot drive is perfectly safe – Apple supports doing so in Disk Utility – provided you have enough free space on your internal storage to support creating both partitions. However, it is time-consuming.

By default, your boot disk (that’s the internal storage used by your Mac) is set to a single partition. What we are doing is changing the partition map to divide your hard disk into as many sections as you want.

IMPORTANT NOTE: Adding additional partitions doesn’t increase the storage capacity on your internal drive. If you need more space, buying an external hard drive is a far better option. What this technique is specifically designed for is running multiple operating systems on the same computer system.

IMPORTANT NOTE 2: If you have a Fusion drive, the SSD portion of the Fusion drive is always associated with the first partition. You can’t move this, nor re-allocate it. So, your new partition will not run as fast as a Fusion drive. Partitioning is not a good idea if your goal is to improve performance.

I should also mention that you can only run one OS at a time using this procedure.

In general, you want to leave at least 25% free space on the first partition, as well as have enough room to install both the operating system and essential applications on the new partition. On my system, macOS takes about 70 GB, while my apps take about 60 GB; plus whatever I need for my files and documents.  This means a minimum new partition size of around 175 GB. (70 GB + 60 GB + 25% of 130 GB = 162.5 GB; which I round up to 175 GB.)

HOW TO CREATE A SECOND PARTITION

Open Disk Utility (Applications > Utilities > Disk Utility)

In the left sidebar, select your internal drive. Most commonly, this is often called Macintosh HD.

NOTE: Whether you have an internal SSD, Fusion Drive, or, on older systems, spinning hard disk, I’m going to call this device the “internal drive” because it acts like a traditional hard drive and “drive” is easy to spell.

Before you start – and this is IMPORTANT – make sure you have enough free space on your internal drive to create the size partition you want. The bar chart in the middle provides a quick summary, the table at the bottom has the specifics.

In my case, my system has about about 1 TB of total storage, with about 542 GB free.

Then, from the toolbar at the top, click Partition.

In the Partition screen, we can partition our internal drive into sections. Since I only want to create two partitions – and I already have 287 GB used, which I can’t remove – here are the partitions I want to create:

NOTE: However, as you’ll discover, High Sierra may not allow you to create a partition this small. I will show you both the error and the workaround.

Click the Plus icon under the blue circle to add a new partition.

Instantly, your Mac calculates a new partition size; in this case the two sides are relatively equal. The partition on the right is the resized original partition.

Grab the white dot and drag it to change the size of the new partition. Even though the estimated size of my new partition only needs to be 175 GB, since I have the space, I’ll make it 300 GB.

Once you’ve sized the partition, give it a name, this is what will appear in the Finder.

Then, determine how you want it formatted. In general, my suggestion is to match the formatting of the existing partition – unless you are formatting it for Windows or Linux, in which case, consult the recommendations for those operating systems to determine the best choice.

APFS, as of this writing, will not run on Fusion or spinning hard disks, which means that for my example, I’m formatting this to Mac OS Extended (Journaled).

NOTE: For systems which require the maximum in performance, I don’t recommend encrypting your boot drive. My recommendation may change in the future when encryption is handled in hardware.

When you are done making changes, click the Apply button in the lower right corner.

Up pops a confirming message making sure this is what you want to do. Click Partition.

Since any hard disk can be partitioned, a warning message next appears saying that because you are altering the boot drive, everything on your system will slow down while the partitioning process is running.

DEALING WITH ERRORS

UPDATE: Apple Support tells me that creating a second partition should only take a couple of minutes. In my case, this took much longer. This could be caused by a problem with my hard disk.

If you don’t get any error messages and the second drive appears on your desktop, then you are done. If you do get error messages, continue reading.

Oops. An error message, our new partition size is too small. Let’s try again, and this time, accept the default size settings.

NOTE: The default settings didn’t work either. I needed to make the new partition even bigger.

I finally found a new partition size that works. I created a new partition of 600 GB, with the original partition reduced to 512 GB.

Again, give the new partition a name, pick a format, then click the Apply button in the lower right corner. Again, it asks me to confirm my settings.

NOTE: As you can see from the screen shot above, I forgot to rename this partition. Not to worry, you can change the name in the Finder at any time.

A lot of work has to be done behind the scenes to take all my existing files and move them so they fit into the reduced size of the original partition. This process is not fast – on my system it took about four HOURS to complete! So don’t do this when you are in a hurry. (Most of the time is spent shrinking the file system and copying the boot files.)

BIG NOTE: Apple tells me this is NOT typical. It is probably caused by a problem with my system. Creating a partition should only take a few minutes.

When you are done, you’ll see a new empty hard disk on your desktop. Like any other drive, you can change the name at any time. This is the new partition. You can use it just like any other hard disk – with the added advantage that we can install a different operating system to it, then boot from it.

Yet, as you can see from the left side-bar in Disk Utility, both Macintosh HD and Untitled are two sections of the same Fusion Drive.

IMPORTANT NOTE: You must install an operating system onto the new partition in order to boot from it. Creating a partition creates an empty space, you still need to install an OS and applications on it to make it useful.

After installing an operating system, you can boot into the new partition by restarting your Mac. Then, when you hear the chime, press the OPTION key. This displays all the available hard disks.

Use the left/right arrow keys to navigate to the hard disk you want to boot from and press Enter.

REMOVING A PARTITION

Removing a second partition – say when you are done experimenting with beta software – is a similar process

Reopen Disk Utility, select the partition you want to remove (it turns blue) and click the Minus icon under the blue circle.

Click the Apply button in the lower right corner…

Then click Partition to confirm this is the partition you want to remove (you can’t remove the original partition).

Removing a partition takes about an hour and a half to reconfigure the boot files. Again, not fast.

BIG, BIG NOTE: Removing a partition permanently deletes all data on the partition. You can’t get it back. Only remove partitions when you have safely copied any and all data that you want to keep to a different location.

SUMMARY

I don’t create partitions every day, but I do use them several times a year. It is a very useful technique to know – especially when you want to keep older versions of the macOS running on your system, run different versions of the same app, or install non-Mac operating systems.


Bookmark the permalink.

26 Responses to Create a Dual Boot System Disk in macOS High Sierra [u]

  1. Thanks Larry, This is very timely for me as I am upgrading to High Sierra and just about to install a new 2 Tb SSD into my MacPro Trash can, and I want to retain access to some of my 32bit applications. Am I correct to think that I should format (one or both) partitions as APFS or APFS case sensitive?

    Thanks for your help

    • Larry says:

      Bruce:

      Case-Sensitive means that if you have two files with the same spelling, but different capitalization, they are treated as two separate files.

      User names are not case sensitive, while passwords always are; regardless of formatting.

      In general, I personally don’t use Case Sensitivity, but the choice is yours.

      Larry

  2. Greg says:

    Does it work in the other direction? I have a Mac Tower held at 10.8 to support legacy apps. It has a second dual boot partition created at the time for a Windows install? Can I install High Sierra on that second partition?

    Thanks.

  3. Hi, Larry.
    My partner had a little extra time this holiday week and decided to take it upon himself to upgrade our editing system to Mojave. Unfortunately he did not check for compatibility with our software, namely FCP 7 and DVD Studio pro. Is there a way to use a partition to revert to the old OS to be able to recover access to those programs? He did, thankfully, back up the computer with Time Machine prior to upgrading to Mojave.

    • Larry says:

      Thad:

      Yes, a partition will allow you to run two different operating systems. That’s the good news.

      The bad news is that, unless you have the original DVDs the OS was insulted from, you won’t be able to download older versions of the macOS. That will require a trip to the Genius bar at an Apple store.

      Worse, creating the partition and installing an older operating system is only half the solution. Now, you’ll need to find the original DVDs for FCP 7 and DVD Studio Pro and reinstall them.

      My suggestion, before you do anything more, is to talk with an expert at either Apple Support or an Apple Store. Figure out what’s possible and the best way to revert.

      Just as a reminder for others, it would have been easier to create a new partition and install Mojave on it, rather than update your current partition.

      Larry

      • Thad Macnamara says:

        Thanks for the reply. One other question: If the entire system was backed using Time Machine prior to the Mojave upgrade, can I restore the Mac to the pre-Mojave state using the Time Machine backup?

  4. J says:

    Will this process work on modern Macs (2015+) as I believe there are new restrictions implemented by Apple to restrict booting into an earlier OS than the Mac shipped with ?

  5. Larry Hinkle says:

    Tried to partition and got the following error message;
    APFS Container Resize error code 49186
    There is not enough free space in the APFS Container for this operation due to APFS Snapshot presence, turning off Time Machine may help
    I have a 2T hard drive with 600 GB used. Tried a 600GB, 800 GB and 1T none worked. Any thoughts?

  6. If one has already used the hard drive a bunch …. and so the files are all over the place, they need to be defragmented….

    Older versions could “repartition in place” – what it did was defrag before changing the partition size. It was very useful – I did that at least once – and because it was defragmenting it took a day or overnight.

    And DON”T FORGET: FCP 7 INSTALLER needs Rosetta to run!

  7. Kathryn M says:

    I edit with FCP7 and FSC3 and Adobe master collection 5.5, on an imac late 2013 (27″) running yosemite 10.10.5, yesterday i partitioned a 4tb external drive to install 2 more bootable drives, one with sierra and one with mojave. Then i installed a trial version of FCPx to test the new majoave ios setup with gopro7 and my older sony ex1r and fs700 footage in a timeline. Where was i supposed to install the FCPx? on the bootable drive, my macHD or another partition? I got an error stating that i am running out of the 50gb that i used for a partition (although internet said i only needed 8 gb to boot up from). what i am doing incorrect?

    • Larry says:

      Kathryn:

      Smile… well, you are getting GOOD use out of your older computer.

      Basically, after installing an operating system, you need to restart your computer into the partition you want to use. Then, install the software you need for that version of the macOS. Effectively, each boot disk ignores everything in other boot disks (meaning applications).

      And the Internet is wrong. You’ll need between 25 – 50 GB of space on your boot disk for both the operating system and various editing NLEs. Plus, you need about 20% free space for temporary files created during editing.

      Larry

      • Kathryn M says:

        well… i’ve been reading your threads as long as I can remember. Had FCP since 1.1 version on a pismo!
        anyway I need to get-a-learnin’ to FCPx before I am unable to use 7. Also this is a used imac! ebay about 5yrs ago 🙂
        Anyway i have sierra on my macbook pro so i have that if need be, but i did create 50gb bootable on the external its actually a 4tb split into 5 partitions. 50gb sierra and 50gb mojave, and waiting on el capi for the other 50gb plus 2tb the rest for video content. So when FCPx asked me where to install i did right onthe 50gb mojave boot?

        thanks for all you’ve done these last few decades to help me without ever knowing you did!

        • Larry says:

          Kathryn:

          Thanks for the kind words – always happy to help.

          As long as you booted into Mojave before doing the installation, everything will end up in the right place.

          Larry

  8. Gene Massey says:

    Larry
    I have a 2012 macbook pro and a Mac Pro, both running 10.9.5 so I can use FCP7. Unfortunately the browsers are so old they are causing problems and anyway I need to get a new phone with the new IOS, and that will not work with 10.9.5.
    What would you charge to take the drives from both macs and create dual boot on both so I can upgrade one partition on each. I prefer cloning both for protection before we do anything and would like a clone of both anyway

  9. Michael Crochetiere says:

    Hi Larry – Thanks so much for this article. I have a 2009 MBP running El Capitan. FCP7 works fine. Very stable. But my computer is having big problems with Safari, Facebook, Zoom and watching live stream video. Overheating, crashes. I changed the fan, but I figure my vintage MBP is just too old. I’ve looked into getting a new MBP (M1) but all the current editing programs (FCPX etc) have daunting learning curves, plus they all have black screens with white/gray text, which is hard on my astigmatic eyes. Dark mode. Another issue. So I’m looking at getting a newer MBP (maybe 2015) with dual boot (OS 10.6.8 or earlier) plus whatever the 2015 machine comes with. I’m not that tech-savvy, so I’m hoping to get the genius bar or my local Apple repair shop to help with setting up the dual boot system. I could use two computers, the M1 and my 2009 MBP, but switching back and forth all day would be a major pain. I hope that the dual boot system would make switching back and forth easier. Thanks in advance.

    • Larry says:

      Michael:

      If you want to stay with FCP 7, you’ll need to find a newer computer that can still run macOS 10.6.8 or so. Not much past 10.7.

      it will be about as awkward running a dual-boot computer as using two computers – my sense is that you should dedicate one computer for gnarl uses – email, web browsing, and business work – while the other is dedicated to editing. That will simplify transferring data between them.

      Larry

  10. Michael Crochetiere says:

    Thanks very much, Larry. For now, I may go with two computers, as you suggest. FCP7 is very stable on my MBP 2009 and I’m well-backed up, if the Mac fails. I’m an independent writer-filmmaker, not a professional editor. So I don’t edit all the time and learning new software is a major time investment. On the Black UI issue, I’ll keep looking. FCPX, DavInci Resolve and Adobe Premiere don’t seem to have an meaningful alternatives to small dark gray or white text on a black UI. This is no small issue for people with some astigmatism (50% of the population). I’ve included two related links about the black screen issue 🙂

    https://adobe-video.uservoice.com/forums/911233-premiere-pro/suggestions/36963772-light-mode-ui

    https://www.vice.com/en/article/ywyqxw/apple-dark-mode-eye-strain-battery-life?fbclid=IwAR0VVYxTPsidGQfU6J9KQwpfI0jgPKhr7XztG0AkmxuWPybkHKY57BEC3G0

Leave a Reply to Bruce Macbryde Cancel reply

Your email address will not be published. Required fields are marked *

Larry Recommends:

FCPX Complete

NEW & Updated!

Edit smarter with Larry’s latest training, all available in our store.

Access over 1,900 on-demand video editing courses. Become a member of our Video Training Library today!

JOIN NOW

Subscribe to Larry's FREE weekly newsletter and save 10%
on your first purchase.