Media Management is Biggest Change in Final Cut Pro X 10.1

Media Management drives editors nuts. Since the beginning of computer-based video editing, trying to remember where your media is stored is a never-ending battle between “getting it done,” and “doing it right.”

Somewhere toward the end of a project, along about the third or fourth sleepless night, file management and organization give way to “Please, just let this end…”

In Final Cut Pro 7, all media was stored in a single scratch disk. This scratch disk included your media, plus render files and a host of other work files that Final Cut needed. The biggest complaint from editors was that we wanted to set scratch disks by project to give us more control over media storage.

NOTE: We could also “link” media, by reference, into a project except that if we moved or renamed the media or the folders containing it, everything broke.

So, in Final Cut Pro X, Apple switched to Events and Projects. Events held media and projects described how that media was assembled; the “edit.” Events could be stored anywhere and projects could use media from any event. The biggest complaint from editors was that we needed to quit Final Cut in order to change events or projects.

NOTE: We could still “link” media, by reference, into a project except that if we moved or renamed the media or the folders containing, everything broke.

So, with this release, Apple replaced Events and Projects with Libraries. Libraries hold everything. Events are now folders within libraries, and projects are now stored in events. Media is stored in the library, which acts like a single, big container file. This makes backups, clones, or simple moves from one hard disk to another a lot easier.

NOTE: Even with this system, we can still “link” media, by reference, into a project but if we move or rename the media or the folders containing, everything breaks. Some things never change.

EXECUTIVE SUMMARY

With Final Cut, you now have the ability to copy media into any selected library, or simply point (“link”) to where that media is stored on your hard disk. If you are very organized, linking is faster. If you don’t want to worry about where your media is stored, copy the media into the Library and be done with it.

Media can be copied without optimizing, if you want to edit using the camera native video format.

Libraries make working with media MUCH easier. But they work best when you copy the media into the library. Linking media, as with past versions of Final Cut, requires that you not move, or rename, any of the media files or the folders that contain it.

HOW IT WORKS

Here’s the new Library pane in Final Cut Pro X 10.1.  (The Library pane is on the left, the Browser is on the right.) There are two open libraries: “Dr. Vint Cerf” and “Glass Blowing.” You can have as many libraries open as you want.

Inside the Dr. Cerf library are four events: Audio, B-roll, Interview, and Projects. Events act as folders within a library and can be named anything. There is no limit to the number of events stored inside a library. I store all my projects in a separate event, just to make them easier to find. You can store projects in any event. Media from any event can be used in any project.

NOTE: In earlier versions of Final Cut Pro X, there was an internal limit of around 2,000 clips per event. That limit was essentially removed in this update.

The library file is stored on your hard disk. Because most of my libraries are small, I store them on a RAID in a folder called “Final Cut Libraries.” You can store libraries anywhere and call them anything. Libraries do not need to be stored in folders. However, I always recommend storing all libraries and media files on a second drive (not the boot drive) for performance reasons.

The library file is actually a bundle, similar to the way Keynote stores its files.

If you right-click on the Library name in the Finder, and select Show Package Contents…

Inside is a folder for each event, which stores the actual media, as well as projects and other Final Cut work files. My STRONG recommendation is to stay out of this folder and don’t move the elements inside it. However, I wanted to let you know how this storage system works in case you ever need to rescue a clip from a library or an event.

NOTE: When copying or moving libraries, ALWAYS!!! move the entire library folder. Never mess with the database files or other individual work files in this folder.

UPDATING EVENTS AND PROJECTS

The new version of Final Cut requires updating all events and projects before they can be used. If you are someone that prefers to learn by watching a video, watch this eight-minute tutorial covering what you need to know to update existing events and projects.

Otherwise, read on.

When you first start Final Cut, this warning will appear. Click Update Later. This allows you to open the program and take a look around without altering any of your existing events or projects.

Here’s what you need to know about updating:

• Media files are NOT affected by this process. Media files are moved into the new library, but not altered or renamed in any way.
• During the update, Final Cut moves media from the older events into the new libraries. This means that no additional hard disk space is needed during the update because files are not being copied.
• When you update events and projects for this version, Final Cut creates a new library for each connected hard disk or RAID that contains either a Final Cut Events or Final Cut Projects folder. This new library is named after that hard disk, and all the media, events and projects from that hard disk are moved into it.
• All compound and multicam clips that are stored on other volumes, but linked to these events or projects, are copied into this new library.
• If you use project folders, any existing project folders are applied as keywords to the new, converted projects.
• Media that is linked to an existing project or event is moved into an External Media folder.

If you have media stored across multiple hard disks, do the update first, then use File > Consolidate Events/Projects to combine all the media into one location. Consolidation is NOT required, but if it helps you to stay organized then go ahead.

To automatically update, select Update All.

• “Update All” combines all events and projects on a single hard disk into one library per hard disk. Events and projects are still stored separately within that library, but, all those files will open at the same time in the library. If you don’t want everything combined, you will need to manually update.

To manually update:

• Only events stored in the Final Cut Events folder, and projects stored in the Final Cut Projects folder, are updated. However, the entire contents of both these folders are updated at once.
• If you only want to update a few events or projects, move only the events you want to update into the Final Cut Events folder. Move only the projects you want to update into the Final Cut Projects folder.
• To prevent an event or project from updating, simply move it to any other location except the Final Cut Events or Final Cut Projects folder. NEVER separate the contents of an event or project folder.

• Next, start FCP X and choose File > Update Events and Projects.

Next, click Update All. Only those events and projects you moved into the Events and Projects folders will be updated.

My hard disk is named “2nd Drive RAID.” The library that was created by the update is named “2nd Drive RAID’s projects and events.” You can rename this library to something more meaningful once the updating is complete.

When the update finishes, you have the option to save events and projects or trash them. My recommendation is to save them until you know that the update process was successful. At which point, they can be deleted.

NOTE: If you select “Move to Trash” and realize you made a mistake, all is not lost. Simply open the Trash and drag the folders back out.

Notice that a new folder was created on 2nd Drive RAID and named “2nd Drive RAID…Projects and Events.”

The events and projects folders and their contents are not changed in any way. The information they contain was simply copied and converted into Final Cut’s new Library media management system.

GET MORE INFORMATION

Apple has published a white paper that covers this process in more detail.
Website: www.apple.com/finalcutpro/

Also, the folks at Intelligent Assistance have released a free version of Event Manager X, along with a white paper, which can simplify the process of moving and updating older events and projects.
Website: www.intelligentassistance.com.

I just completed all-new training on Final Cut Pro X 10.1. To see the first 15 movies – which will give you a Quick Start into the application – visit my YouTube channel.

To download your own copy of my Final Cut Pro X training, please visit our store.

SUMMARY

Updating isn’t difficult, but you need to understand how the process works. To be safe, if you have the hard disk space, I recommend creating a backup of all events and projects before updating… just in case.

Then, update one event and one project and watch what happens. This is what I did as I was learning the system. Once you understand how this works, updating is simple. And, as I mentioned above, media is moved but not altered by this process.

The key is to decide how you want events and projects organized before you start the update process. And remember that you are not updating specific events or projects, but all the events or projects stored in the Final Cut Events and Final Cut Projects folders on a single hard disk.

The good news is that once the updating is complete, you never have to do it again. And libraries are a LOT easier to work with than the old Events and Projects!

---