[UPDATE 3: In Nov, 2019, Apple released the 16″ MacBook Pro. While these specific recommendations refer to earlier MacBook Pros, my general suggestions in terms of where to spend money remain the same. UPDATE 2: In July, 2018, Apple updated MacBook Pros again. While the technology has changed, my general recommendations remain the same for these new units. UPDATE 1: In June 2017, Apple updated their MacBook Pro laptops with new processors, more SSD storage and renamed, but not changed, GPUs. ]
A frequent email request from readers is help in configuring a computer for video editing. There are many options and, sometimes, it is hard to decide the best place to spend your money.
Yes, the launch of the new MacBook Pro has had its share of controversy. But, what if you still need to buy a laptop for video editing? What do you really need? How much do you really need to spend?
You don’t need to spend a fortune to get the right system. Let me help you decide what you need to buy.
NOTE: Here are three other configuration articles you may find useful:
There are many reasons to buy a laptop, with portability leading the list. However, the MacBook Pro has enough power that you can reasonably consider it for your principle editing system, especially when you combine it with an external 5K or 4K monitor.
WHAT SIZE LAPTOP?
I recommend 15″.
Whether you are running Premiere or Final Cut, larger screen sizes help. Both these interfaces work better on larger screens.
Second, while Apple has expanded – and vastly improved – the speed and storage capacity of the MacBook Pro, I still recommend storing projects and media on an external drive. While there is a benefit to storing everything on the internal hard disk – portability and speed being two of them – using a second drive allows you to move projects between computers, as well as access to your data in the event your computer goes into the shop.
However, for best results, you would be well-advised to consider an external SSD if you want speed, or a RAID if you need more storage space. Single hard disks will work, but don’t equal the performance of the laptop itself, or these other two options.
DOES THE TOUCH BAR MAKE A DIFFERENCE?
I think it does. I found it increasingly helpful as I worked with the unit.
NOTE: Here’s an article that explains how the Touch Bar works in Final Cut Pro X.
SHOULD I WORRY ABOUT BATTERY LIFE?
I think the current battery controversy will be resolved quickly through software. However, even more than that, video editing burns through batteries, regardless of how long they are supposed to last.
For me, all my editing – even on the road – is done when I’m attached to wall power; excepting only the very tiniest projects. Since I’m never on battery power for editing, how long the batteries last is not an important consideration for me.
UPDATE: The battery issue was traced to a bug in the OS. This is no longer an issue.
WHAT SPEED CPU?
This depends.
If you are principally doing video editing, you can save money by purchasing the 2.6 GHz processor. Both Premiere and Final Cut heavily leverage the GPU and, while the CPU is important, if you are on a budget, you can conserve dollars here.
UPDATE. As the processors and speeds have changed, read this now as: Editing does not require as fast a processor as video compression. The base level processor will be fine for most editing, while a faster processor will benefit compression.
However, if you are principally doing transcoding and compression, then the faster CPU makes sense as both of these tasks use the CPU much more than the GPU.
NOTE: Keep in mind that all the new MacBook Pros use hardware acceleration for H.264 compression, which makes creating videos for the web extremely fast even on slower processors.
UPDATE: And, the 2017 versions now support hardware acceleration for H.265 video.
If budget is driving this decision, selecting the slower processor will be fine, the differences between the two are not significant enough to warrant the extra cost.
HOW MUCH STORAGE?
The internal SSD storage of the new MacBook Pro is the fastest I’ve ever measured. It is SERIOUSLY fast!
If you plan to store your media and projects on an external drive of some sort, then get the 256 GB SSD. The operating system and all your applications will take less than 30 GB, leaving plenty of room for temp files and general work space.
However, if you need to have everything stored on the laptop itself, buy the most storage you can afford. SSDs have continued to increase in storage capacity. If you plan to store media externally, you don’t need a very large SSD. Again, the OS only takes about 30 GB of storage.
UPDATE: Here’s an updated article on storage speeds and media requirements that will help you put your storage needs into perspective.
WHICH GPU?
This is the opposite side of the CPU question. A GPU (Graphics Processing Unit) is specifically designed for rendering bitmapped images very, very quickly. For the first time, all MacBook Pro laptops include both the “built-in” GPU from Intel and a discrete (meaning “separate”) graphics system from AMD called “Radeon.”
There are three different Radeon GPUs: the 450, 455 and 460. The distinctions between them are the number of compute units – 10, 12, and 16, respectively – and the amount of VRAM – or RAM attached to the GPU itself. The 450 and 455 have 2 GB of VRAM, while the 460 has 4 GB. More compute units means more processing power, while more VRAM means faster performance.
NOTE: You can read more about these Radeon GPUs here.
UPDATE: With the 2017 upgrade, all GPUs were renamed, but not change. So, the Radeon 450 is now 550, 455 is now 555, and 460 is now 560. Performance and recommendations have not changed.
If you are principally doing video editing or motion graphics work, purchase the 455 or, if you can afford it, the 460.
If you are principally transcoding and compressing, the base-level 450 GPU will be fine.
SHOULD I WORRY ABOUT RAM?
All 15″ laptops have 16 GB of RAM. My tests have shown this is more than sufficient for virtually all video editing.
NOTE: Here’s an article that goes into editing performance on the MacBook Pro in much more detail.
DO I NEED CONVERTER CABLES?
Yes. The MacBook Pro only has USB-C ports. If you have existing devices, you’ll need a converter cable for Thunderbolt 2 devices and a second cable for traditional USB devices.
NOTE: Apple also realizes that we are in a transition phase between ports, so they’ve extended their promotional prices on Apple USB-C adapters (specifically, USB-C to USB-A, Thunderbolt 3 to Thunderbolt 2, and USB-C to Lightning). Plus, the reduced pricing on the new LG 4K and 5K monitors have been extended to March 31, 2017.
Also, if you have a lot of devices, consider a dock, which takes a single USB-C cable from the computer and splits it into a wide variety of separate ports.
HOW MUCH SHOULD I SPEND?
The base level 15″ MacBook Pro is $2,399 (US). This will be fine for all SD and general HD editing that is not effects-heavy.
Adding a higher performance GPU to this system will improve effects and color grading performance and be adequate for virtually all HD editing, even multicam work. This raises the price to $2,599.
If you are working in 4K or higher resolutions, do lots of effects work in After Effects or Motion, and are principally focused on video editing, the higher end laptop with 512 GB of storage and a top of the line GPU will be a better choice. This raises the price to $2,899.
And, for those of you who believe that money is no object, the top of the line system complete with all the storage Apple can cram into it, will set you back $4,299.
If it were my money, I’d go with the $2,899 system:
As always, I’m interested in your opinions.
154 Responses to Configure a MacBook Pro for Video Editing [u]
← Older Comments Newer Comments →Hello, thank you for your article, it is very helpful. I have one last question I am thinking between 2.9 and 3.1 CPU (Mac Book Pro 2017), I am going to edit 4k Canon (XF-AVC/MXF ) and Sony video, also I am going to transcode the result to DPX and maybe do some color grading in Da Vinci ressolve. What is the better choice for that; 2.9GHz/GPU 560/ssd512 Gb is enough?
Alexandra:
You won’t see any significant difference between the 2.9 and 3.1 CPU. You WILL need external storage, 512 GB won’t be nearly enough. And get as much RAM as the system will hold.
Larry
thank you, it very help me to buy new macbook pro
Hi Larry. Bit of in a pickle. I was considering purchasing a 2015 15inch MacBook Pro. Reason being magsafe, cheaper for a 15inch (1799 apple eduction). But I wanted to hear your thoughts on purchasing a 2015 Haswell model in 2017. Is it worth it? What are your thoughts on a refursbhied 13inch 2015 for $1099 in 2017? Is it advisable to purchase them in 2017. My plan was to purchase a 2015 model and upgrade in 2020. Im a light user. Just interested on your thoughts.
Ike:
In general, video editing requires larger screens. So, if it a choice between 13 and 15 inch. Get the 15 inch. You’ll appreciate every pixel.
CPU speed is important, but a faster GPU and more RAM are more important.
Larry
Hey I have a Intel Iris Pro 1536 MB regarding the graphics card. Will this be sufficient for editting with final cut pro X photos and videos.
Burak:
That depends upon what you mean by “sufficient” AND the codecs, frame rates and frame sizes you’ll be editing.
In general, it will be slow, but should work fine for most HD work.
Larry
Hi Larry – thanks for the article ! I’m looking to edit 4k online(not proxy)with a resolution of 4:2:2 10 bit. Assuming I transcode to Pro Res or even shoot Pro Res 4:2:2:2 10bit 4K via an Atomos recorder, will the $2,899 system listed above handle that workload ? I’ll use a RAID system in conjunction with it. Thanks so much.
Emilio
2.7 GHz Intel Core i7 processor
512 GB SSD
Radeon Pro 460 with 4 GB of VRAM
Emilio:
The computer should be fine, based on what you tell me here. Be SURE to get a Thunderbolt 3 RAID with at least four drives configured as RAID 5.
The GPU is a little underpowered for serious motion graphics work, but for editing, you’ll be fine.
Larry
Hi there,
I am a grad student hoping to turn my research project into a documentary, but not sure how much other editing I’ll do after that. I would be purchasing Final Cut Pro X to edit.
Have narrowed down my laptop options to these:
13″ MacBook Pro with touch bar
256GB SSD
or
12″ MacBook
256GB SSD
Should I upgrade to 16GB of RAM, or is 8GB good? Would it depend on which laptop?
And should I consider more SSD before more RAM?
Thank you!
Tina:
Given your choices:
* Go with the bigger screen. Video editing takes a LOT of screen space.
* More RAM is better than a bigger SSD
* You will, almost assuredly, need a second hard drive to store your media. Any SSD won’t be big enough.
Larry
What is your recommended hard drive setup for video editing on a MacBook pro when working away from home?
Is it worth carrying around and plugging in multiple external hard drives for the following? cache, media storage, previews, exports, etc.
It’s a 2017 MPB.
i7 2.9 gHz
560 Video Card
1TB SSD
Chad:
Well, he said smiling, “it depends.”
If all your media files are small, and you need to travel light, you can copy everything to your internal SSD. After system files and allowing for free space, you should assume your SSD will hold a total of about 600 GB of media/data.)
On the other hand, if you are editing a project with terabytes of data, the internal SSD won’t be big enough. At this point, you need to carry some external drives. How big those drives are depends upon the size of your project. Whether they need to be a RAID depends upon whether you are shooting and editing HD material, or 4K, or HDR, or VR. HD is easy, all the others will benefit from a RAID.
The total amount of media you shoot will also play a role. Shooting 30 minutes of material is easy. Shooting 100 hours, is not.
Larry
Hi Larry,
Thank you for your article and info.
I was recently finishing my first 30 minute long documentary movie on my older 15″ macbook pro,2,2 late 2011, which served me well. I had ssd & 16gb of ram. However when I was finishing the project with Luts/color grading the computer screen went black then pink stripes and it seems the gpu is gone-system does not boot up. I have the movie unfinished and am thinking about buying a laptop. I have two candidates, since I work in FCPX: MBP 2017 – 2,9gh,512 or 1TB,16GB,560, OR 3,1gh, 1TB, 16GB, 560gpu.
I worked with 4k proxy files on my old Mbp, now I would like to work with 4k original files. I use transitions, optical flow, some slow motion parts with optical flow, and color grading, 1 or 2 luts. I am planning to gradually work on more projects/30-1h documentaries/etc in the future so Im considering the laptop to be future proof and serve well. I have a 27″ monitor at home, where I do 70% of editing, but I also do some editing during 9-5 office job, also Id love some portability to be able to grab laptop and work from anywhere not only home, hence decision to get 1TB. For the mentioned documentary I had about 300GB of material, so I assume 1TB would always suit me for 1 short movie/project at the time. I have 10TB hdd in thunderbolt1 enclosure at home, so I can always keep original files there but work on laptop from anywhere. Please, can you share your thoughts on the cpu difference.
I would rather spend a bit more money now, then regret waiting at the computer desk in 4-5 years for 4k or 8k video to be rendered to proxy on slower cpu.
Thank you for your input and thoughts on this.
[…] Configure a MacBook Pro for video editing […]
In the UK we have a choice of Intel Iris Plus Graphics 650. And that’s it.
How can I change this?
Peter:
Welcome!
You can only buy what Apple is selling. I would contact an Apple Store to see what your options are.
Larry