I love gear. As anyone who has spent time with me will attest, if something has blinking lights, I’m a fan.
One of the benefits of covering the NAB Show for the Digital Production Buzz is that I get to design and install all the equipment we use in the booth: power, network, audio, computers and software. This annual event gives me a chance to practice what I preach, as well as work with new hardware in the pressure-cooker of live production. Most of this gear I buy, some I borrow and return after the show.
I also obsess over audio quality. It makes no sense to spend this much effort and money creating programming if the shows don’t sound as good as possible. For me, the gold standard in audio is NPR. So, I’m always looking for better ways to get our audio to sound great. On the other hand, we are a podcast, not network radio; our budgets are based on the size of the company credit card. Financial reality always rears its ugly head.
This year, I was really excited to add a new mixer to our equipment list: a Mackie Onyx 1202i. A Mackie 1202 VLZ 12-channel analog mixer has been the heart of our weekly show for the last five years, so I’m a big fan of the brand. I bought this new mixer specifically for our NAB coverage. I also wanted to replace an older Alesis FireBox mixer that still worked, but which Alesis no longer sells.
Mackie’s are legendary for their reliability, functionality and reasonable price. But, ultimately, while we took the new mixer to NAB, we never used it and sent it back as soon as we returned home. We got better results with a simple Alesis FireBox mixer that cost half as much.
The reasons why are not obvious and apply to more than just a single mixer. And that’s why I’m writing this article.
OUR AUDIO WORKFLOW
I wrote about our audio workflow in an earlier article – click here – but the short version is that the mixer sends audio simultaneously in two formats: analog and digital.
Analog audio feeds our live event:
The digital audio, though, is used for all recording and posting. If you listened to the live show, you heard the analog audio stream. If you listened to any posted show or interview, you were listening to the digital recording.
We do this by recording the FireWire output of the mixer on a new MacBook Pro 15″ laptop (using a Thunderbolt to FireWire converter cable) into Adobe Audition. We use up to five simultaneous audio streams from the mixer:
Each stream is recorded to its own track in Audition, so we have independent control over each mic when cleaning up an interview during editing. Because all interviews go to the web, we master final audio levels so that they don’t exceed -3 dB, which works out to about -20 dB LKFS.
NOTE: One of the reasons we don’t master levels to 0 dB, is that MP3 compression is optimized for an audio level of -6 dB, while AAC compression is optimized for an audio level of 0 dB. Because we distribute in both formats, we split the difference.
As I was testing the new Mackie Onyx mixer in the week prior to the show, it met all my needs for an analog mixer. But, when I sent a 0 dB tone to the mixer, and set all mixer levels to 0 dB, when that signal was sent digitally to the computer, the level arrived at -18 dB! Since Audition makes no level adjustments to incoming audio, that level drop had to occur at the mixer.
What makes this significant is that audio levels are logarithmic. For every 6 dB drop in audio gain, we lose 50% of the perceived volume of the audio. So, recording a digital signal at -18 means that we are losing 75% of the audio levels from that signal.
Sure, in a digital environment, we COULD boost the gain back, but all we are doing is the audio equivalent of stretching pixels – inventing audio data that wasn’t recorded in the first place. All this does is make the digital audio sound thin and weak. Worse, because we were recording live on the NAB trade show floor surrounded by trade show noise, raising levels in post-production significantly increased background noise.
The mixer’s analog audio sounded fine, but the digital audio was totally unsatisfactory.
CONTACTING MACKIE SUPPORT
I contacted Mackie Tech Support to figure out what was going on. They knew what the problem was instantly. The short answer, as the support tech explained it, is that analog audio has lots of headroom above 0 dB before distortion becomes objectionable. However, digital audio starts to distort as soon as levels exceed 0 dB. To prevent distortion, Mackie decreased the level of analog signals feeding into digital devices by 18 dB. For this reason, audio levels don’t match between analog and digital audio.
This extra “headroom,” or the distance between a current audio level and the point where distortion starts, means that if an actor suddenly starts yelling, the far louder levels caused by the yells don’t distort the recording
ITS THE WRONG SOLUTION
Here’s the problem. The 18 dB drop in levels seeks to prevent excessive dynamic range causing digital distortion. But I don’t record uncontrolled mics.
To me, the best way to get great audio is to spend the money on great mics, great preamps and setting proper levels. Because I am obsessing about audio quality, I have each mic feeding its own Aphex Channel preamp, which provides compression and limiting on each mic. Then, I bring each mic into the mixer at line level with all excess levels fully controlled not to exceed -3 dB
Also, the music and commercials I play during the show are also fully level-controlled not to exceed -3 dB.
In other words, I have no need of digital headroom on the analog output. All that -18 dB level drop is doing is ruining the audio I’ve spent lots and lots of money and effort to sound good.
Remember that “Sound on Sound” article I referenced earlier? The one I was sent by Mackie Tech Support? I want to quote the last two paragraphs:
“It surely doesn’t require a brain the size of a planet to realize that digital systems employed in live recording require a totally different alignment with analogue equipment than those used in post-production applications. So why have so few manufacturers addressed this issue with switchable gain structures or adjustable sensitivities? Most professional converters are adjustable, as are many of the better semi-pro units…
All that would be required is an ‘operating level’ switch to reset the alignment between analogue and digital signal levels from the standard 0dBu = -20 or -18dBFS, to something more like 0dBu = -12 or -10dBFS. Let’s hope some manufacturers read this and take note!”
That article was written in May, 2000. 14 years later, and there’s still no switch on a Mackie mixer, even though the Onyx system is actively touted by Mackie as a “premium” analog and digital mixer. Without the ability to accurately match analog and digital levels, the mixer has only limited value in a digital production environment. And I realized that the only way this situation improves is for me to send the mixer back and write about it. If you agree, share this article with your friends and Mackie.
It can’t be that hard to make great analog audio sound equally great when recorded digitally. Hopefully, one day, Mackie will figure that out.
Oh! During NAB, we went back to the older Alesis FireBox mixer because the analog sound was fine and 0 dB sent digitally out of the Alesis arrived at -4 dB in Audition. 4 DB I can deal with.
Final Cut Pro X 10.4
Edit smarter with Larry’s brand-new webinars, all available in our store.